Solvent Based Correction Fluid (White-Out)

Manufacturer Information
Name
Lee Products Company
Address
800 E 80th St
Bloomington, MN 55420
Phone
952-854-3544
Effective Date
2015-08-04
Pictogram


NFPA

HMIS
Health |
2 |
Flammability |
3 |
Physical Hazard |
0 |
Personal Protection |
H |
Signal Word
Danger
Hazard Statements
- Highly flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation.
Precautionary Statements
- Prevention: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical equipment. Use non-sparking tools. Take action to prevent static discharges. Wear protective gloves and use eye protection. Wash affected skin areas thoroughly after handling. Wear protective gloves. Wash affected skin thoroughly after handling. Wear eye protection. Avoid breathing spray. Use only in a well ventilated area. Response: If on skin: Take off immediately all contaminated clothing. Rinse skin with water. If on skin, wash with soap and plenty of water. If skin irritation occurs: Get medical advice. Take off contaminated clothing and wash it before use. If in eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice. If inhaled: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell. Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. Keep cool. In case of fire: Use extinguishing powder, CO2, or foam. Disposal: All disposal practices must be in compliance with all Federal, State, and local laws and regulations.
Alfred Benesch & Company Local data
- SKU #
*This local data is shared by all revisions